Free Model Download

1000g Side Label

3D Printer Accessories Filament Storage No Supports Stackable Easy Print

Snap-in side labels for 1000g filament spools — pre-labeled for PLA, ASA, PETG, and TPU, plus a blank version for anything else. Designed as part of the MakerX 1000g shelf system. Prints flat, no supports, no adhesives. Under 15 minutes per label.

Download Files View on Creality Cloud All Models

Click any image to enlarge

1000g side label installed on shelf 1000g side label on shelf 1000g side label model rendering 1000g side label as printed on build plate 1000g side label fresh off the build plate PLA side label face down on build plate 1000g side label slicer time and material estimates

Downloads

Choose Your Variant

Five material variants, each with a 3MF (print-ready with settings baked in) and STL. Grab the 3MF for the fastest path from download to print.

★
Download from Creality Cloud — it makes a real difference.

Every download through Creality Cloud earns points that help keep my models free and my pages running. If you have an account, downloading from there is the best way to support the work at no cost to you.

Download on Creality Cloud

No Creality Cloud account? No problem — all files are available for direct download below.

PLA side label face down on build plate
PLA
Standard version. Print in any color PLA — the recommended starting point for most setups.
★ Creality Cloud 3MF STL
ASA side label face down on build plate
ASA
Heat and UV resistant. Good choice for garage or outdoor storage where temps fluctuate.
★ Creality Cloud 3MF STL
PETG side label face down on build plate
PETG
Slightly flexible and moisture resistant. Tolerates humidity better than PLA.
★ Creality Cloud 3MF STL
TPU side label face down on build plate
TPU
Flexible and snap-resistant. Easiest to seat and remove without cracking the label.
★ Creality Cloud 3MF STL
Blank side label face down on build plate
Blank
No text. Use for custom filament types, write in marker, or modify the SLDPRT to add your own label.
★ Creality Cloud 3MF STL

Print Settings

Slice It Right

These are the settings used on the reference prints. The 3MF includes the full profile — open in Creality Print or any compatible slicer and it's ready to go with no adjustments needed.

Supports
None
Orientation
Print Flat
Layer Height
0.20 mm
Infill
15–20%
Nozzle
0.4 mm
Bed Adhesion
Brim or None
Label orientation in slicer

Also published on Creality Cloud — follow the profile for new models and slicer settings.

View on Creality Cloud

Released under CC BY-NC-ND 4.0 — free for personal use, credit appreciated, no commercial use or derivatives.