Free Model Download

Fast Food Sauce Holder

The straw is the mount. Feed it up through the center port, slide the holder down until it settles on the lid, and your drink cup carries two sauces for you — no clip, no adhesive, nothing balanced on your lap. The port is bored wide enough for jumbo and milkshake straws, and the whole thing prints as one piece with no supports.

The black holder riding on a drink cup in a car console, a barbecue sauce cup in one bay and honey mustard in the other, with a red straw up through the center port

Downloads

Get the Files

Files are published on Creality Cloud with slicer profiles included. Download the 3MF for the fastest path from file to first print.

★
Download from Creality Cloud — it makes a real difference.

Every download through Creality Cloud earns points that help keep my models free and my pages running. If you have an account, downloading from there is the best way to support the work at no cost to you.

Download on Creality Cloud

Print Settings

Slice It Right

One piece, no supports, no hardware. It is sliced at 0.10 mm because the finish matters more than the speed on a part this small — it is still under two hours. PLA is what the gallery parts were printed in; PETG is the better pick if you want more chemical resistance where it meets food.

Supports
None
Material
PLA / PETG
Layer Height
0.10 mm
Infill
10% Gyroid
Nozzle
0.4 mm
Walls
3
Top / Bottom
5 / 3
Bed Adhesion
5 mm Brim
Size
107.2×56.5×22.2mm
One Plate
27.37g · 1h 46m
Print configuration card: one piece at 107.2 by 56.5 by 22.2 mm, 27.37 grams of PLA over 1 hour 46 minutes, 0.10 mm layers, 3 walls, 10 percent gyroid, no supports

More models and tested slicer settings on my Creality Cloud profile.

View Profile

Released under CC BY-NC-ND 4.0 — free for personal use, credit appreciated, no commercial use or derivatives.