Free Model Download

Filament Storage Insert Labels

A tray full of identical clear bags tells you nothing. This stands in the tray in front of the spool and says what is in it, in letters you can read across the room. Nothing clips, nothing sticks — lift the spool out and the label stays with the tray, ready for whatever goes in next.

A black insert label with red PLA lettering standing on the printer's build plate

Downloads

Get the Files

One project file holds all five plates — pick the label you want and slice it. The STLs are in there too if you would rather bring your own profile.

★
Download from Creality Cloud — it makes a real difference.

Every download through Creality Cloud earns points that help keep my models free and my pages running. If you have an account, downloading from there is the best way to support the work at no cost to you.

Download on Creality Cloud

The 3MF is the faster path — open it, pick a plate, and slice. A full print & use guide is attached to the Creality listing.

What's Included

Five Plates, One Project

Every label is the same part with different lettering, so they all print the same way — about 2 h 33 m and 60 g each. The name is what the label says — all five plates are sliced for PLA, so print them in whatever you like.

The PLA plate in the slicer, with the label and its purge tower laid out
PLA
The everyday one. Plate 04 in the project.
The ASA plate in the slicer, with the label and its purge tower laid out
ASA
For the tray holding your ASA. Plate 01.
The PET-G plate in the slicer, with the label and its purge tower laid out
PETG
Reads PET-G on the plate. Plate 03.
The TPU plate in the slicer, with the label and its purge tower laid out
TPU
For the flexible spool you keep forgetting. Plate 05.
The Blank plate in the slicer — one label, no purge tower, because it is single color
Blank
No text — label-maker strip, paint pen, or a color code. One color, so it runs shorter. Plate 02.

Print Settings

Slice It Right

These are the settings the reference prints were made with. The 3MF carries the full profile — open it in Creality Print or any slicer that reads 3MF projects and it is ready to go. The four lettered plates are set up as black body, red text; a single-extruder printer can slice them in one color and the lettering still reads, because it is embossed.

Supports
None
Orientation
Face Down, Flat
Layer Height
0.20 mm
Infill
10% Gyroid
Nozzle
0.4 mm
Walls
2
Bed Adhesion
None
Each Label
240×70×45.5mm · 60.4g · 2h 33m
A red-on-black PLA insert label standing in a loaded tray in front of its spool

More models and tested slicer settings on my Creality Cloud profile.

View Profile

Released under CC BY-NC-ND 4.0 — free for personal use, credit appreciated, no commercial use or derivatives.