Free Model Download
Pet Bowl Riser
A raised feeding stand for pet food and water bowls — lifting the bowl reduces strain on a pet's neck and joints while eating. The deck takes a 149 mm drop-in opening, so a standard stainless dish hangs on its own rim and lifts straight back out for washing. Scale the height on its own in your slicer to suit your pet.
Downloads
Get the Files
Files are published on Creality Cloud with slicer profiles included. Download the 3MF for the fastest path from file to first print.
Every download through Creality Cloud earns points that help keep my models free and my pages running. If you have an account, downloading from there is the best way to support the work at no cost to you.
Download on Creality CloudPrint Settings
Slice It Right
It prints deck-down as one piece, so the legs stand up as plain prisms and nothing overhangs — that is why a part this size needs no supports. The 5 mm brim runs inside and out, the inner ring holding the edge of the bowl opening down. Scale the height on its own if your pet wants the bowl lower or higher; nothing else has to change. Each leg has a recessed pocket in its end for a stick-on rubber foot, which sits flush rather than proud.
Follow MakerX Designs on Creality Cloud for published models and slicer settings.
View ProfileReleased under CC BY-NC-ND 4.0 — free for personal use, credit appreciated, no commercial use or derivatives.