Free Model Download

S25 Ultra Charging Stand

Bedside chargers are usually just a flat pad — the phone lies there charging, screen dark, doing nothing else. This stand holds a Galaxy S25 Ultra in landscape on a press-fit magnetic wireless charger, so with a night-clock app running it turns into a clean, glanceable bedside clock.

The phone docked sideways in the printed stand on a side table, showing the time

Downloads

Get the Files

One part on one plate. The 3MF carries the profile the reference stand was printed with, tree supports and brim included, and the STL is in there for bringing your own.

★
Download from Creality Cloud — it makes a real difference.

Every download through Creality Cloud earns points that help keep my models free and my pages running. If you have an account, downloading from there is the best way to support the work at no cost to you.

Download on Creality Cloud

The 3MF is the faster path — open it and slice. A full print & use guide is attached to the Creality listing.

▤
Print & Use Guide

The same guide attached to the model listings, hosted here so you can read it before you print — PDF · 5 pages · 650 KB

Open the Guide

Before You Print

Check Your Fit

The stand was fitted and tested with this phone, case and charger. A much thicker case or a larger charger may not seat the same way.

Phone and case: Samsung Galaxy S25 Ultra in an ESR MagSafe Case, Clear Black.

Charger: QUZUDN 15W Magnetic Wireless Charger.

Running a different phone, case or charger? Get in touch — I am happy to customize the fit.

What Makes It Work

A Charger That Tells The Time

The charger lives inside the stand and the phone hangs on the front of it, so there is nothing to line up in the dark.

The empty stand on a table, a round magnetic charger seated in the phone pocket between two open windows
Magnetic Charger Press-Fit
A magnetic wireless charger press-fits into the back of the stand — a dab of glue helps — and holds securely in place. The rear of the stand is fully open, because magnetic charging tends to run hotter than a cable, and the airflow keeps both the charger and the phone cooler.
A close view of the stand's recess holding a round charging puck, cable exiting behind
Landscape Magnetic Mount
The phone snaps on in landscape and the magnet holds it firmly through the front cutout while it charges. The cable runs out the back of the stand, so nothing hangs off the front of the nightstand.
The phone docked sideways in the printed stand on a side table, showing the time
Becomes A Real Bedside Clock
Load a night-clock charging app and the whole setup turns into a clean, glanceable bedside display — the phone charges and tells the time instead of lying face up doing nothing.

Print Settings

Slice It Right

These are the settings the reference print was made with, on a Creality Hi with a 0.4 mm nozzle. The 3MF carries the full profile — open it in Creality Print or any slicer that reads 3MF projects and it is ready to go.

It is a real print: 169.98 g and about 12 h 21 m, 56.99 m of filament, roughly $5.10 in material. 128.53 g of that is the part and 41.45 g is support.

The body prints tilted, so the whole underside is held on tree supports — auto at 30°, from the build plate only — with a 5 mm outer brim. At 117.4 × 190.5 × 72.2 mm it fits a 220 × 220 mm bed.

Supports
Tree, Auto 30°
Layer Height
0.12 mm
Walls
4
Top / Bottom
5 / 3
Infill
9% Gyroid
Brim
5 mm, outer only
Material
PLA · 220 °C / 60 °C
The Part
117.4 × 190.5 × 72.2 mm · 12h 21m
Slice data: one part on one plate, 169.98 g and 12 h 21 m, with 41.45 g of tree supports

More models and tested slicer settings on my Creality Cloud profile.

View Profile

Released under CC BY-NC-ND 4.0 — free for personal use, credit appreciated, no commercial use or derivatives.