Free Model Download
SKADIS Bottle Tray
A deep tray that hangs straight on an IKEA SKADIS pegboard and takes the things that will not stand up on a shelf — paint bottles, glue, tools, cables. Two rows of hooks print as part of the tray, so it goes on the board with no hardware at all.
Downloads
Get the Files
One plate, one piece, no assembly — the hooks print as part of the tray. The 3MF carries the tested profile with the tree supports already switched on.
Every download through Creality Cloud earns points that help keep my models free and my pages running. If you have an account, downloading from there is the best way to support the work at no cost to you.
Download on Creality CloudThe 3MF is the faster path — open it and slice. The STL is in there too if you would rather bring your own profile.
The same guide attached to the model listings, hosted here so you can read it before you print —
Print Settings
Slice It Right
Check your bed before you start this one. The tray is 235.2 mm on its long axis and the profile adds a 5 mm brim on each side, so it needs about 246 mm of clear plate — a 220 × 220 printer cannot take it, and turning the plate 45° makes it worse rather than better. Tree supports are not optional: the twelve hooks are horizontal tabs off a vertical wall, so every one of them starts in mid air. They cost 6.69 g and come away by hand.
More models and tested slicer settings on my Creality Cloud profile.
View ProfileReleased under CC BY-NC-ND 4.0 — free for personal use, credit appreciated, no commercial use or derivatives.