Free Model Download

Jack-o-Lantern Tea Light

A 76mm pumpkin that lights all the way through, not just at the eyes — because a printed vase-mode diffuser sits under the lid and spreads the flicker. Three prototypes and two diffusers to get right. One-color and two-color plates both included.

The printed jack-o-lantern lit from inside by an LED tea light, its eyes, nose and mouth glowing orange on a maple desk

Downloads

Get the Files

Files are published on Creality Cloud with slicer profiles included. Download the 3MF for the fastest path from file to first print — both color options are already set up as separate plates.

★

Download from Creality Cloud — it makes a real difference.

Every download through Creality Cloud earns points that help keep my models free and my pages running. If you have an account, downloading from there is the best way to support the work at no cost to you.

Download on Creality Cloud

Print Settings

Slice It Right

Tree supports are on in the 3MF and the mouth needs them — the two settings that matter are a 0.24 mm support Z gap and a 3-layer interface, which is what stops the teeth snapping off during removal. The diffuser prints separately in vase mode. A translucent or light filament carries the glow best.

Supports

Tree · 0.24mm Gap

Material

PLA

Layer Height

0.1 mm

Infill

9% Gyroid

Nozzle

0.4 mm

Walls

Diffuser

Vase Mode · 3.21g

Assembled

76×76×63mm

One Color Plate

43.55g · 4h 18m

Both plates pre-configured: the two-color plate at 9 h 24 m and 155.51 g against the single-color plate at 4 h 18 m and 43.55 g

More models and tested slicer settings on my Creality Cloud profile.

View Profile

Released under CC BY-NC-ND 4.0 — free for personal use, credit appreciated, no commercial use or derivatives.